Repacor™ SW-1000

Repair coating/putty with 100% volume solids.

An innovative, abrasion-resistant 2-pack coating/putty designed for general maintenance and repairs, providing protection to bare steel, often in areas with mechanical damage, corrosion, or poor initial applications.

Interested in learning more or purchasing this product?

Benefits

Solvent-free, 100% solids, CMR-free

Easy-to-use packaging for difficult repair jobs

Single or multi-layer coating

Early water resistance and under water cure

Surface tolerant - can be used on many substrates as manual derusting, stainless steel, galvanization or aluminium, even on foreign coatings (except siloxane based coatings)

Corrosion protection at 24 mils (600 microns), similar to original shop coating

Plate like glass flakes increase strength and resistivity to water vapor diffusion

Impact and abrasion resistant

Color stable up to 180°F (82°C)

Resistant to industrial and marine environments, fresh-, brackish- and salt water, neutral salts, mineral oil and heating oil, grease and oils, detergents,etc.

Dry heat up to approx. 212°F (100°C)

Damp heat and warm water up to approx. 104°F (40°C)

Can be immersed in water immediately after application (without mechanical stress, e.g. caused by waves)

Brand

Repacor™

Industry

High rise
Steel Fabrication
Energy
Oil and Gas
Power Generation
Bridge and Highway
Construction

Technology

Liquid 100% Solids

Product Technical Data

Chemistry

Polyaspartic

VOC

<100 g/L (0,83 Lb/Gal)

Product data is a representative set of attributes and characteristics for this system or product line. Data for individual products may vary and is subject to change. Please reference the individual product datasheet for exact specifications on the Datasheets tab above or through Search.