Steel-Seam™ FT910 Epoxy Patching and Surfacing Compound
A two-component, 100% solids, epoxy surfacing compound.
Steel-Seam™ FT910 Epoxy Patching and Surfacing Compound is a 100% solids epoxy surfacing compound for steel or patching compound for concrete. It is formulated for ease of application with squeegee, trowel, or airless spray on horizontal, vertical or overhead applications. Cures down to 35°F/1.7°C.
Interested in learning more or purchasing this product?
Contact usMore Details
Benefits
- 100% solids
- Tolerates moisture during cure
- Outstanding workability
- Easy to use
- May be applied from 5 mils to 1/2" wft/dft vertically
- May be applied up to 1" thick with aggregate addition
- Cured down to 35°F/1.7°C
- Reduced or low HAPS
Brand
Industry
- Water and Wastewater
- Bridge and Highway
- Marine
Technology
Technical Data Table
| Chemistry | Epoxy |
|---|---|
| VOC | <100 g/L (0,83 Lb/Gal) |
Product data is a representative set of attributes and characteristics for this system or product line. Data for individual products may vary and is subject to change. Please reference the individual product datasheet for exact specifications on the Datasheets tab above or through Search.
Still can't find a datasheet you are searching for? Try our full datasheet search or check out our paintdocs service.