Care Ultra - Solvent-Based Acid-Catalyst
New 2k Acid-Catalyst products with ultra-low formaldehyde emissions
The EMEAI interior wood markets are required to reduce formaldehyde emissions according to the new EU regulations. As a result, the current Acid-Catalyst products that emit this substance must be replaced by mid-2026.
Sherwin-Williams is proud to introduce a new solvent-based range called Care Ultra. Care Ultra will be replacing the current AC offering. The range includes clear and pigmented solvent-borne 2k AC systems with both FA-free formulations and ultra-low emission solutions.
Find out more or speak with an expert
Optional digital brochure with an enquiry
Compliance and performance
The Care Ultra range is designed to easily meet the new restrictions, so upgrading to this new acid-catalyst range will enable you to continue using this well-known and robust technology. The performance process is the same in terms of reactivity, drying time and pot life as our old range of Acid-Catalyst products. They will allow you to have the same productivity and to use the same equipment as before, without any need for additional investments.
The performances of the new Care Ultra products remain unchanged, and they offer the same or even better chemical resistance than the old Acid-Catalyst range on the same type of surfaces.
The new regulations are based on the ECHA REACH “Restriction on Formaldehyde Release from Articles” and were approved on 13th February 2023. This will become law after a period of transition by mid-2026. The maximum exposure limit for furniture finished goods will be 0.062mg/m3, which must be measured in accordance with EN717-1 Methods. (The current limit is compliant with E1 certification, which is 0.124mg/m3.).
Product information
| Features | Benefits |
|---|---|
| Features Excellent chemical resistance. | Benefits Same or even better chemical performances than the current Acid-Catalyst range. |
| Features Complete range. |
Benefits
FA-free and Ultra-low FA emissions products. Topcoats, primer and hardener available. Clear and pigmentable. |
| Features Productivity and application benefits. |
Benefits
Same coating system compared to the current AC range. No investments are needed. |
| Features Excellent drying performance. |
Benefits
Long pot-life. Very fast drying. |
| Features Use of standard hardener. | Benefits You can use the old standard hardeners; however less amount needed. |
| Features Same type and way of application. | Benefits You will receive the same good surface appearance and even better durability. |
More from the Care Ultra range
Thinking about making another type of switch?
Our new Care Ultra low formaldehyde range may perhaps not be the only solution and the type of change you had in mind. If you have been thinking about taking the big leap in taking this opportunity to change technology – we are here for you, from the start to a great finish.
Coatings technology review
We can offer you a number of technologies like Waterborne UV or a Polyurethane system – the decision is yours and we are here to help and to give advice.
Line design
If you need to make changes within your existing line, our team of Line Design Engineers can help you customise the line according to your requirements.
Speed is key
Need to speed up the line efficiency – our experienced Technical Representatives will help you find the best and most effective solution for you.
Sustainable solutions
If you are looking for a more sustainable solution, we have a wide range of plant-based coatings that will lower your CO2 emissions and improve your work environment.