Sher-Wood® High Solids Vinyl Sealer

Fast-drying high solids vinyl sealer

Sher-Wood® High Solids Vinyl Sealer is a fast drying high solids vinyl sealer meeting current Federal EPA regulations for wood finishing. It offers better moisture resistance than nitrocellulose lacquer sealers and may be used under all solvent-based Sher-Wood coatings for wood.

Interested in learning more or purchasing this product?

Benefits

Meets the Federal HAPS rule for wood finishes as packaged

High solids - high build

VOC of less than 1.8 lb per pound of solids uncatalyzed

Excellent moisture resistance

Meets KCMA performance requirements with Sher-Wood finishing topcoats listed below

Fast Drying

Easy sanding without stearates

Good holdout

May be applied by using conventional, airless, air assisted airless and HVLP spray methods

May be tinted up to 2 oz./gallon with Chroma Chem® 844 colorants

Industry

Kitchen Cabinetry
Furniture

Product Type

Sealer

Technology

Solvent Liquid Coatings

Product Technical Data

Interior/Exterior

Interior

Technology

Solvent Liquid Coatings

Maximum VOC

594.58 g/L 4.96 lb/gal - 617.06 g/L 5.14 lb/gal

Dry Time to Sand/Recoat

45 minutes - 1 hour @ 77 °F (25 °C)

Still can't find a datasheet you are searching for? Try our full datasheet search or check out our paintdocs service.

Product data is a representative set of attributes and characteristics for this system or product line. Data for individual products may vary and is subject to change. Please reference the individual product datasheet for exact specifications on the Datasheets tab above or through Search.

Still can't find a datasheet you are searching for? Try our full datasheet search or check out our paintdocs service.