Sher-Wood® Catalyzed Lacquer
Catalyzed lacquer
Sher-Wood® Catalyzed Lacquer combines the toughness and chemical resistance of catalyzed varnishes and the depth and appearance properties associated with high-quality nitrocellulose lacquers.
Interested in learning more or purchasing this product?
Contact usProduct Details
Benefits
- Meets the Federal HAPS rule for wood finishes as packaged
- Excellent resistance to household chemicals and solvents
- Meets KCMA specification requirements when applied over catalyzed Sher-Wood Vinyl Sealers, T67F3, T67F5, T67F6 or T67F7
- Fast drying - similar to nitrocellulose lacquers
- 21% Volume Solids - much higher than most standard lacquers
- Ideal for kitchen cabinets, vanities, chairs, office furniture, household furniture and a wide range of interior wood products
- Versatile application - may be applied by conventional, airless and air assisted airless spray
- Can be rubbed like a nitrocellulose lacquer
- Excellent print resistance
- Free of lead hazards as packaged in compliance with Consumer Product Safety Commission's (CPSC) 16 CFR Chapter II, Subchapter B, part 1303.
Industry
- Furniture
- Interior Building Products
- Kitchen Cabinetry
Product Type
Approvals/Certifications
Technology
Technical Data Table
| Interior/Exterior | Interior |
|---|---|
| Technology | Solvent Liquid Coatings |
| Maximum VOC | 649.18 g/L 5.41 lb/gal - 658.59 g/L 5.49 lb/gal |
| Dry Time to Sand/Recoat | 30 minutes - 1 hour @ 77 °F (25 °C) |
Still can't find a datasheet you are searching for? Try our full datasheet search or check out our paintdocs service.
Product data is a representative set of attributes and characteristics for this system or product line. Data for individual products may vary and is subject to change. Please reference the individual product datasheet for exact specifications on the Datasheets tab above or through Search.
Still can't find a datasheet you are searching for? Try our full datasheet search or check out our paintdocs service.