CP Enhancing Pipeline Below Ground Solutions

Pipeclad® 2000

Pipeclad 2000 is a thermosetting fusion bonded epoxy coating engineered to be applied to pipelines. Pipeclad 2000 can be used in single layer applications, as a primer layer for dual layer FBE, as a primer layer for 3-layer PE/PP applications, and as a girth weld coating.

For use over properly prepared steel and fusion-bonded epoxy coated pipe in industrial environments such as but not limited to:

• Pipeline
• Joints
• Valves 
• Fittings
• Oil Country Tubular Goods (OCTG)

Pipeclad® 2060 MRO

Pipeclad 2060 Moisture-Resistant Overcoat is the top layer of a dual layer powder system that combines enhanced barrier properties with the performance of high operating temperature (HOT) and abrasion-resistant overcoat (ARO) technology.  

It provides optimum physical protection for the anti-corrosion coating against moisture uptake and physical damage, specifically during backfilling and horizontal directional drilling applications.  With the added benefit of service temperatures up to 302°F/150°C (dependent upon the base layer of corrosion protection).

Pipeclad 2060 MRO may be applied in both plant and field applications, such as but not limited to:

• Pipeline
• Joints
• Valves 
• Fittings
• Oil Country Tubular Goods (OCTG)

Pipeclad® HOT Series 

The Pipeclad HOT series is Sherwin-Williams family of thermosetting, epoxy, powder coatings formulated for higher glass transition temperatures (Tg), greater flexibility and enhanced barrier properties. The advanced capabilities of HOT FBE coatings are facilitating groundbreaking exploration activities, empowering the oil and gas industry to access new oil fields that were once inaccessible. This progress is made possible by coatings formulators who have implemented a range of molecular-level modifications to FBEs. These enhancements have successfully elevated the glass transition (Tg) temperature of the coatings, increased their flexibility, improved crosslink density, and strengthened their damage resistance. These sophisticated properties not only enable operators to drill deeper wells and extract hotter materials, but they also allow producers to utilize reel-lay techniques for more efficient pipeline installations, surpassing the traditional S-lay and J-lay methods.

• Pipeclad Hot 120 Designed for continuous operating temperature 248°F/120°C

• Pipeclad Hot 150 Designed for continuous operating temperature 302°F/150°C

• Pipeclad Hot 180 Designed for continuous operating temperature 326°F/180°C

• Pipeclad Hot 200 Designed for continuous operating temperature 392°F/200°C

For use over properly prepared steel and fusion-bonded epoxy coated pipe in HOT industrial environments such as but not limited to:

• Offshore under insultation
• High glass trasition with simoultaneous high flexibilty
• Suitable for reel-lay application - unique selling point 
• Pipeline
• Joints
• Valves 
• Fittings
• Oil Country Tubular Goods (OCTG)

Pipeclad® 5000

Pipeclad 5000 is a two-component, ultra high-solids, amine-cured epoxy. Designed for rapid pipe installation on the right of way, Pipeclad 5000 provides exceptional corrosion and chemical resistance for both girth weld and spot repair applications. Providing a synergism with cathodic protection, Pipeclad 5000 affords unparalleled protection for your high value pipeline projects.

For use over properly prepared steel and fusion-bonded epoxy coated pipe in industrial environments, such as but not limited to:

• Buried pipelines – pipes, valves, bends, fittings, fabricated sections and air-to-soil transitions 
• Maintenance or rehabilitation coating of existing lines after removal of old coatings or tape
• Spot repair/touch-up of mechanically damaged plant-applied coating 
• Girth weld coating on new installations and field tie-ins 
• Shop spray applications 
• Buried and ground-contact utilities