High Performance Coatings for Structural Steel & Concrete 

Sherwin-Williams offers high-performance coatings to protect the steel and concrete used in modern facility construction.  Historically, coatings systems were applied on site after erection and installation of structural steel, cast in place and pre-cast concrete. At this point the surface preparation and coatings application are in direct conflict with Mechanical Electrical Plumbing (MEP) trades vying for access to the same spaces.

Our High-Performance coating systems are designed with a deep understanding of the needs of construction, the aggressive service environment during manufacturing & processing operations and the future preventive maintenance requirements of an in-use facility.   

Coatings selected for construction should also offer faster throughput & return to service, reduced downtime, low odor, low VOC, and ease of application - all important considerations for the maintenance of your occupied/in-operation facility.  

Intumescent Fire Protection

In the world of fire safety there are three types of (Fireproofing) fire protection; detection, suppression, and compartmentation. Passive fire protection (PFP) falls into the compartmentation category which can be addressed with Intumescent coatings.  

Sherwin-Williams has proven fireproofing systems— both shop-applied and field-applied. Fireproofing is a critical safeguard for any facility, especially those with an increased fire risk due to the nature of manufacturing equipment, processing, chemical/fuel storage, and other fire hazards inherent in a modern manufacturing environment. Modern construction sites are a veritable hive of activity. Multiple trades, accelerated project timelines, and limited access can lead to congestion and delays. Opting for off-site application of intumescent fire protection materials presents an opportunity for an innovative approach to construction sequencing and scheduling.

Off-site application of fireproofing and high-performance coatings for structural steel not only streamlines project scheduling but also ensures a safer and cleaner construction environment compared to traditional on-site sprayed fire-resistive materials. For most manufacturing facilities, shop-applied FIRETEX 9502 is our recommended choice for passive fire protection.

Industrial Water & Wastewater Systems

Sherwin-Williams is a proven leader in the coatings and linings for industrial water and wastewater treatment structures vital in daily operations of modern manufacturing facilities. The ability to maintain high water purity level is imperative – and so is maintaining the infrastructure that houses and transports that water.

Industrial wastewater systems are constantly exposed to toxic, corrosive, and erosive chemicals which can easily break down and corrode steel and concrete, if not properly protected. Taking your wastewater treatment assets out of service for unscheduled repair/maintenance is not ideal. Our durable industrial coatings and linings systems offer long-term, worry-free protection of your tanks, piping, and containments.

Resinous Flooring / Chemical Resistant Coatings 

Manufacturing and Processing facilities demand flooring solutions that can withstand the intense exposures of the production environment and the constant movement of heavy equipment and materials. Combining safety, efficiency, and sustainability, these flooring systems are designed to meet the specific needs of an industrial environment.

Floor coatings and secondary containment lining systems must be designed to protect concrete surfaces in aggressive chemical storage and loading environments. Flooring, lining and containment systems have been identified, qualified, and determined suitable for use in every environment found in manufacturing and processing facilities. Whether your facility needs high-performing flooring with chemical resistance, slip resistance, thermal shock resistance, moisture vapor resistance, or static control properties, Sherwin-Williams offers a range of advanced flooring solutions tailored for the unique demands of these facilities. 

Ceiling & Wall Systems

Our versatile wall systems were designed for a multitude of applications — from food processing and packaging to locker rooms, Bio-Pharm production, and facilities with the strictest hygiene protocols. Each system is engineered to reduce downtime and deliver the exceptional performance you demand. Sherwin-Williams wall systems are chemical resistant and designed to meet and exceed your unique needs and requirements. Our ceiling coatings come in a bright white which increases light reflectivity creating a brighter and cleaner atmosphere.

Pavement Markings

Sherwin-Williams pavement markings offer excellent adhesion and chemical and dirt resistance. Our highly visible formulas are ideal for highlighting curbs, identifying loading zones, emergency zones, and defining traffic boundaries. Sherwin-Williams pavement markings deliver long-lasting and dependable performances to enhance curb appeal.