Choosing Resuflor™ Glaze Hardeners

← Back to Tech Tips

Resuflor Glaze Regular hardener, Resuflor Glaze Fast hardener and Resuflor Glaze Water Clear hardener can all be used with Resuflor Glaze resin, Resuflor Cove Rez and Shop Floor resin. It is important to understand how they affect working and cure time. 

Regular is the standard hardener for Resuflor Glaze. It can be used for broadcast coats and grout coats. It is a hardener is a good option for optimal working time throughout temperatures of 60°F – 90°F. At 70 degrees, it gives the crew 20 minutes working time and an 8 hour cure. 

Fast hardener is a great option to use for broadcast coats in cooler temperatures or when attempting to install two broadcasts in one day.  It is also a great option for patching. (Do not use it for grout coats.) 

Water Clear hardener is used for grout coats over chip or quartz broadcasts. It is also a terrific option when installing the Resuflor Metallic II system. At 70 degrees, it gives the crew 30 minutes working time and a 12-14 hour cure. It will give the crew the most working time, especially in warmer temperatures. Expect extended cure times below 70 degrees.