Tips for Using Resuflor™ Glaze WB Primer

Resuflor™ Glaze WB Primer is a two-component, epoxy primer for concrete floors. This list of tips will help you get best results for working with it:

This product is best suited for application in temperatures between 60°F and 90°F.
Concrete is the ONLY substrate this product can be applied to.
Substrate must be clean, sound, and dry.
Not a UV stable product.
Relative humidity of greater than 70% will add to curing time.
This product is designed to be applied at 200 square feet per gallon.
Do not apply this product less than 8 mils wet or “out-gassing” can occur.
A second coat may be necessary if the substrate is very porous.
Do not use this product to “fill” or “level” any surface imperfections.
Any build up in excess of 12 mils wet film thickness will not cure properly.
Proper ventilation to move air is recommended.
White hazing appearance can occur when applied in high humidity environments.
Do not use as a stand-alone system because this product has no chemical or wear resistance, and white staining will occur when exposed to water.
Protect from freezing. If product freezes, heat/thaw, mix with resin and apply according to instructions.