Kem Aqua® Bonding Primer for Plastics
One-component acrylic latex
Kem Aqua Bonding Primer for Plastics is a one-component, acrylic latex coating intended as a tie coating or adhesion-promoting primer over structural foam plastics, such as polystyrene, polyphenylene oxide, polycarbonate, and gas counter pressure molded plastics. It can be top-coated with a wide range of coatings used in the business machine and electronic cabinetry market.
For Industrial Shop Application Only.
Interested in learning more or purchasing this product?
Contact usBenefits
- Excellent adhesion to a wide range of structural foam plastics including gas counter pressure molded plastics
- VOC* as packaged <1.5 lb/gal, 180 g/L less water and exempt solvents
- Reduce and clean up with water**
- Fast air dry or force dry cure
- Single component - no catalyzation
- No critical recoat time
- Application friendly - may be applied using a wide variety of application equipment
- Topcoat with: Kem Aqua 8710 W/R Enamel, Kem Aqua 600T W/R Enamel, Kem Aqua 8530, Polane® 700T W/R Enamel, or Polane Polyurethane Enamels
- May be tinted to pastel colors using up to 4 oz/gal of Kem-Aqua colorants
Industry
- General Finishing
- Electronics
- Building Products
Product Type
Substrate
Technology
| Chemistry | Acrylic |
|---|---|
| Interior/Exterior | Interior |
| Application Method | Spray, Conventional Spray, Airless Spray, Air Assisted Airless Spray, HVLP |
| VOC as Applied | <180 g/L, 1.5 lb/gal |
Product data is a representative set of attributes and characteristics for this system or product line. Data for individual products may vary and is subject to change. Please reference the individual product datasheet for exact specifications on the Datasheets tab above or through Search.
Still can't find a datasheet you are searching for? Try our full datasheet search or check out our paintdocs service.
For California SB-258 Cleaning Product Right to Know Act documents on designated products please visit Paintdocs.com