A two-component, 100% solids, epoxy surfacing compound.
Designed for steel or patching compound for concrete, Steel-Seam™ FT910 Epoxy Patching and Surfacing Compound is formulated for ease of application with squeegee, trowel or airless spray on horizontal, vertical or overhead applications.
- 100% solids
- Tolerates moisture during cure
- Outstanding workability
- Easy to use
- May be applied from 5 mils to 1/2" wft/dft vertically
- May be applied up to 1" thick with aggregate addition
- Cured down to 35°F/1.7°C
- Reduced or low HAPS
- Water and Wastewater
- Bridge and Highway
Technical Data Table
|VOC||<100 g/L (0.83 Lb/Gal)|
Product data is a representative set of attributes and characteristics for this system or product line. Data for individual products may vary and is subject to change. Please reference the individual product datasheet for exact specifications on the Datasheets tab above or through Search.