Coil & Extrusion - Exterior Building Renewal

Metal façades are valued in commercial and institutional architecture for their sleek design, durability, and low maintenance. Over time, however, protective coatings may degrade the curtain wall leading to potential structural issues if not addressed early.

Any of the following signs could be indicative of a coating's failure:

• Corrosion
• Chalking
• Fading
• Peeling
• Cracking
• Staining

Once coatings peel, moisture and salts can penetrate aluminum panels, accelerating corrosion and deterioration. If corrosion becomes extensive, full replacement of curtain wall panels may be necessary — a significantly expensive undertaking.

Sherwin-Williams offers high-performance protective coatings specifically designed for building renewal projects. These coatings can be field applied, providing enhanced protection and extending the lifespan of existing structures.

Structural Steel 

Visible rust, peeling, or cracking coatings on structural steel may indicate underlying corrosion and potential structural concerns. If not addressed, corrosion can compromise integrity and pose safety risks—especially in salt-air environments where deterioration accelerates.

Any of the following signs could be indicative of a coating's failure:

• Corrosion (Including but not limited to: pinhole rust, bolted connections, pitting, joint welds, crevices, concrete induced)
• Chalking
• Fading
• Peeling
• Cracking
• Staining

Routine maintenance with protective coatings is essential to prevent costly repairs and extend service life. Sherwin-Williams offers a range of solutions for structural steel, from single-coat systems to shop-applied primer/finish combinations. Our coatings meet ISO 12944 standards for C5 extreme environments and comply with LEED emissions criteria for interior use.

Intumescent Fire Protection

Fireproofing is a critical safeguard for any structure, especially those with high fire risk due to extensive electrical equipment, automated processes, continuous airflow, and flammable or explosive materials.  

Any of the following signs could be indicative of a coating's failure:

• Peeling
• Cracking
• Rusting
• Corrosion
• Flaking (SFRM)

If you are seeing peeling, cracking, or show signs of rusting or corroding, it could be critical to recoat to stay compliant with industry code and safety standards. Sherwin-Williams FIRETEX line has various long-lasting offerings for intumescent fire protection to fit the needs of your facility.  

Flooring

Recognizing that the flooring requirements for different buildings can vary significantly, it's crucial to identify key indicators of potential failures, no matter the flooring type. These failures can pose a risk to safety, hygiene, productivity, and the facility. 

Any of the following signs could be indicative of a coating's failure:

• Concrete cracking
• Erosion of concrete
• Deteriorating joints
• Concrete repair / patching
• Water pooling- slope to drain issues
• Cove separation from substrates
• Dislodged or missing bricks or tiles
• Discoloration and chemical erosion
• Existing coating is peeling, cracking blistering, or delaminating
• Slippery surfaces

Sherwin-Williams High Performance Flooring delivers safety, durability, and sustainability. Engineered to excel in demanding industrial environments, our flooring systems cater to your facility's specific needs. Whether you require superior chemical resistance, slip resistance, thermal shock resistance, moisture vapor resistance, or electrostatic dissipative properties, we have the right system for you. Our seamless resinous floors not only enhance hygiene by minimizing dirt and bacteria accumulation but are also one of the most sanitary flooring options available.

Ceiling & Wall Systems

Flaking or peeling paint on ceilings or walls can pose safety risks to building occupants and may signal underlying structural or moisture-related issues. Any signs of coating failure should be promptly inspected to identify and address potential problems before they escalate.

Any of the following signs could be indicative of a coating's failure:

• Peeling
• Flaking
• Cracking
• Staining

Sherwin-Williams versatile wall systems were designed for a multitude of applications — from kitchens and hallways to locker rooms, and areas with the strictest hygiene protocols. Each system is engineered to reduce downtime and deliver the exceptional performance you demand. 

Our wall systems are chemical resistant and designed to meet and exceed your unique needs and requirements. Our wall coatings are monolithic flexible coating systems designed to coat drywall, block walls, IMP panels and more. Our ceiling coatings come in a variety of colors including bright white which increases light reflectivity creating a brighter and cleaner atmosphere.

Mechanical, Electrical & Plumbing (MEP)

The performance and longevity of Mechanical, Electrical, and Plumbing (MEP) systems are critical to the smooth operation of any facility. Harsh conditions in these areas can lead to coating degradation, exposing infrastructure to corrosion and damage.

Signs of coating failure may include:

• Corrosion
• Corrosion Under Insulation (CUI)
• Delamination
• Condensation on piping
• Condensation on ductwork
• Stains on ceilings

Protective coatings are essential for maintaining the integrity and safety of MEP systems. Sherwin-Williams offers high-performance solutions designed to restore and safeguard MEP infrastructure, helping reduce maintenance disruptions and extend service life.

Secondary Containment

Secondary containment areas are essential for any facility storing fuel, chemicals or commodities. These areas must feature floors and walls that are not only tall enough to securely hold the tank's contents but also robust enough to resist the chemicals or commodities for up to 72 hours, ensuring no seepage into the ground.

Any of the following signs could be indicative of a coating's failure:

• Peeling
• Cracking -thermal cycling
• Blistering or delamination
• Discoloration and chemical erosion
• Freeze/Thaw substrate damage for exterior - new coatings can seal and protect
• Improper slope or drainage
• Joint sealant degradation
• Corrosion of embedded steel
• Chemical attack – surface erosion
• UV degradation

Sherwin-Williams high-performance coatings for secondary containment help prevent EPA related risks. Our systems are customized to match the chemical resistance needed at your facility. Our Project Development Managers can also work with you to develop a maintenace schedule.

Industrial Water & Wastewater Systems

Ensuring the seamless operation of business is dependent on the reliability of water and wastewater systems. When coatings fail, it can lead to the degradation of essential structures like recovery tanks, clarifiers, disinfection tanks, and concrete foundations. Exterior UV-stable coatings may chalk or fade, while rust and deterioration can compromise supporting steel structures and pipes. Even the linings in fire suppression tanks are at risk. These signs can signal critical problems that demand attention.

Any of the following signs could be indicative of a coating's failure:

• Corrosion
• Chalking
• Fading
• Peeling
• Cracking
• Blistering
• Pin holing
• Chemical attack
• Microbial attack
• Under film corrosion

Sherwin-Williams is a proven leader in the coatings and linings for water and wastewater. Our linings are resistant to acidic, alkali, ultra-pure water, and many other commodities. We understand your current industrial needs and can prepare for your future waste streams. Designed for a twenty-year life cycle, our wastewater solutions align with your sustainability goals by minimizing energy and water consumption.

Exterior Coatings

Exterior coatings serve as a vital shield, waterproofing surfaces and safeguarding them from harsh weather conditions. When these coatings fail, not only do they lose their visual appeal, but they also leave the substrate vulnerable to damaging erosion and corrosion. Additionally, exterior surfaces can fall prey to mold and mildew, which can deteriorate the coatings. Regular monitoring is essential to maintain the integrity and longevity of your exterior surfaces.

Any of the following signs could be indicative of a coating's failure:

• Corrosion
• Chalking
• Fading
• Peeling
• Cracking
• Staining
• Freeze-thaw damage
• Algae or mold growth
• Efflorescence
• Surfactant leaching

Sherwin-Williams exterior protective coatings are designed to withstand UV rays and extreme weather conditions. Choose from our specialized options that offer superior resistance to mold, mildew, and fungus, ensuring your surfaces stay pristine year-round.

Roofing

Roofing is essential to any facility safeguarding everything beneath it. If you've spotted any signs of wear and tear, such as roof holes, leaks, or ceiling stains, it's a signal that your roofing needs attention and restoration.

Sherwin-Williams UNIFLEX® restorative roof coatings give new life to your existing roof systems and provide an extended life cycle for your facility. We have a variety of options for repairing from patching to a complete roof system. Coating your existing roofing system alleviates waste and the costs involved with removing and disposing of these materials. 

Traffic Deck Membranes

Coating and waterproofing systems are essential for preserving structural integrity and safety, especially on top decks and high-traffic areas. When coatings break down, water and salt can penetrate the surface, exposing concrete to the elements and accelerating deterioration. This is especially critical on top decks and high-traffic areas, where compromised waterproofing can lead to structural damage and safety concerns.

Any of the following signs could be indicative of a coating's failure:

• Cracking
• Delamination
• Fading
• Peeling
• Chloride attack- areas that use salt in the winter
• Drainage issues- ponding water
• Joint failure
• Spalling
• Structural fatigue

Regular maintenance and timely reapplication of protective coatings are essential to preserve structural integrity, minimize repair costs, and extend the life of the deck. Sherwin-Williams offers durable, moisture-resistant, and UV-stable parking deck systems designed to withstand heavy use and harsh conditions.

Pavement Markings 

Facility pavement markings — used to designate parking spaces, crosswalks, and fire lanes — are essential for safety and regulatory compliance. However, they often fade or fail prematurely, especially when applied to challenging surfaces like silane-sealed surfaces, where adhesion and compatibility are critical.

Revitalize your parking lot with Sherwin-Williams pavement markings. These coatings offer excellent adhesion and chemical and dirt resistance. Our highly visible formulas are ideal for highlighting curbs, identifying handicapped and emergency zones, and defining traffic boundaries. Sherwin-Williams pavement markings deliver long-lasting and dependable performances to enhance curb appeal.

Interior Protective Coatings

Interior protective coatings are essential for maintaining the integrity, safety, and efficiency of facilities. Sherwin-Williams protective coatings and linings extend from the envelope of commercial and institutional structure to its interior assets. Our extensive line of products can also repair and protect:

• Machines
• Handrails
• Doors
• Conveyors
• Tanks
• Forklifts
• Production equipment
• Racking
• Diamond plate
• Mezzanines
• Exposed structures - metal ceiling decks