Expanding Storage Tank Performance Through Strategic Lining Overcoats: A Practical Path to Savings for Tank Owners

by John Zimmerman, Key Account Manager, Calvin Sumner, Key Account Manager, and Rob Galvin, Key Account Manager, Sherwin-Williams Protective & Marine

Download White Paper

Coating being applied by a man with a sprayer on a storage tank liner

Summary

Storage tank owners are under constant pressure to control maintenance costs, reduce downtime and keep critical assets in reliable service. Interior tank linings play a major role in that equation by protecting steel surfaces from corrosion, chemical exposure and mechanical wear. But when a lining begins to show age, full removal and replacement is not always the only path forward.

This article explains how strategic lining overcoats can help extend storage tank performance when the existing lining and tank structure meet the right criteria. It covers the economics of overcoating, situations where overcoating should be reconsidered, inspection and testing requirements, key steps in the overcoating process and how tank owners can work with Sherwin-Williams to make a more confident lining maintenance decision.

What to expect:

  1. Why Strategic Tank Lining Overcoats Deserve a Closer Look
  2. The Economy of Overcoating Tank Linings
  3. When to Reconsider Overcoating Existing Tank Linings
  4. Testing for Tank Lining Overcoating Eligibility
  5. Inside the Tank Lining Overcoating Process
  6. FAQs About Strategic Tank Lining Overcoats

Why Strategic Tank Lining Overcoats Deserve a Closer Look

Today’s high-solids, high-performance tank linings are engineered to deliver dependable protection for 30 years or more. Still, coatings don't last forever. When deterioration inevitably surfaces, many owners automatically plan to perform a full lining removal and replacement. Yet in numerous cases, a more economical, less disruptive option is available: overcoating the lining. Done under the right conditions, an overcoat can add years of tank service at a fraction of the cost and downtime of a complete reline.

The reflex to perform full lining restorations comes from experience and standards that prioritize risk reduction. However, based on collective field data, many tank linings are still structurally sound at the middle to end of their anticipated service life. In these cases, an overcoat can deliver budget flexibility by deferring major capital expenditures and compressing downtime windows. Most importantly, this process can be done without compromising performance when the proper evaluation and controls are in place.

The critical criteria required to make an assessment on whether a lining overcoat is possible include the condition of the tank itself, the history of the contents stored inside since the lining was installed, the condition of the existing lining and other factors. When these variables align with a positive assessment from certified inspectors—perhaps along with help from a coatings manufacturer—overcoating may be a prudent choice. Working closely with those parties can help tank owners determine whether the cost, schedule and risk profile favor an overcoat or a total lining replacement.

The Economy of Overcoating Tank Linings

Every tank interior takes some abuse. Corrosive cargos, cyclic temperatures, mechanical impacts and routine operations can all take a toll on linings over time. When that use results in delamination of the lining, widespread mechanical damage or clear evidence of underfilm corrosion, many owners will elect to perform a full removal and reline. In tanks in which ultrasonic testing shows bottomside steel loss or in which numerous patch plates are already in place, that instinct is usually correct (Figure 1). The only defensible path may be a comprehensive reline.

A storage tank liner before coating is applied

Figure 1. A lining may be considered for overcoating if minimal bottom‑side corrosion and pitting are present, with no compromise of the tank’s structural integrity.

Despite full lining replacements being the norm, significant evidence is available to reinforce the viability of overcoating linings when conditions permit. Owners, inspectors and coating suppliers have observed many overcoated systems performing well when the original lining still exhibits good adhesion and overall integrity (Figure 2). Given that tanks featuring modern 100% solids linings often arrive at midlife in better shape than similar assets did a generation ago, the risk profile for an overcoat has been lowered and the value proposition has improved.

A storage tank liner before coating is applied

Figure 2. Collaborating with technical representatives from coatings manufacturers can help tank owners evaluate the feasibility of overcoating a lining with limited delamination and modest mechanical damage.

In fact, owners who choose to overcoat when feasible can realize advantages such as:

  • Shorter outages: Overcoating typically returns an asset to service faster than a full blast and reline, reducing production costs and scheduling pain.
  • Lower labor demand: Because the existing liner stays in place, surface prep is lighter, and the overcoat usually requires fewer mils of build, trimming both labor hours and complexity.
  • Reduced total spend: Less blasting, lower coating volumes and smaller waste streams decrease the overall project expense.
  • Budget balancing: By extending service through another inspection interval, an overcoat can push the larger capital hit of a complete reline into the future, freeing near‑term dollars for other priority work.

For terminal operators and tank owners managing multiple assets, these advantages can compound across an entire maintenance program. A single successful overcoat may reduce immediate project costs, but a disciplined overcoating strategy can also help owners plan outages more effectively, prioritize tanks with higher risk profiles and reserve capital for assets that truly require full lining replacement.

When to Reconsider Overcoating Existing Tank Linings

Deciding whether a lining is a viable overcoat candidate is a screening exercise. Paper qualifications, including  product storage histories, initial coating application, repair logs and prior inspection data, come first. A hands-on interior assessment then helps validate those findings and determine whether the existing lining can serve as a reliable foundation for a new overcoat.

Several scenarios commonly tilt the final assessment away from overcoating and toward full removal. These issues are not always automatic disqualifiers, but they do increase the level of risk and should be reviewed carefully before a project moves forward.

Tank owners should avoid treating overcoating as a universal cost-saving measure. The economics only make sense when the existing lining can continue functioning as a sound foundation for the new system. If inspection results point to widespread adhesion loss, contamination, embrittlement, excessive film build or structural concerns, full removal and replacement may be the more responsible long-term decision.

Stored Commodity and Service History Concerns

The tank’s service history is one of the first areas owners should review. Past exposure can affect the existing lining in ways that are not always visible during a basic inspection, especially when the tank has stored aggressive materials or has been used for swing service.

The Tank Held Aggressive or Water-Sensitive Cargos in the Past

Products with a very high or low pH, certain fertilizers and chemicals or cargos prone to water sensitivity can infiltrate a coating matrix and linger. Even rigorous cleaning and mechanical prep may not eliminate contaminants embedded in the lining, which can interfere with adhesion or shorten the life of any overcoat.

The Tank Has an Unknown Service History

Overcoating is a higher risk choice when the tank’s commodity storage history is unknown. It’s particularly true for swing service assets where records may be incomplete. Lack of certainty about past exposures raises the potential for hidden incompatibilities.

Existing Lining and Film Build Limitations

The existing lining must be sound enough to support another coating layer. If the lining has lost flexibility, contains widespread defects or is already near its maximum recommended film build, adding another system may create more risk than value.

The Existing Lining Is Aged and Brittle

As some systems age, they lose flexibility. During surface preparation, those brittle films can fracture, creating new defects that undermine the bond of the original lining and therefore the overcoat. This process can accelerate the potential for failure.

There Are Film Build Constraints

Each lining system has a maximum recommended dry film thickness (DFT). If adding an overcoat would push the total DFT beyond the system’s recommended limit, the additional film build could contribute to cracking, delamination or premature failure of the new coating system.

Tank Mechanical Integrity Considerations

The condition of the steel substrate matters just as much as the condition of the lining. If the tank has significant steel loss, extensive repairs or other structural concerns, the coating decision should follow a broader evaluation of mechanical integrity.

The Tank Has Questionable Mechanical Integrity

After decades in service, tanks may carry the accumulated effects of corrosion, patch plate repairs and fatigue from pressure and thermal cycling. If any steel loss is significant, or if the patch plate counts exceed an owner’s internal threshold, applying additional coating film may not be prudent until the tank’s mechanical integrity concerns are addressed.

Here, judgment and owner criteria vary, but caution usually prevails.

Testing for Tank Lining Overcoating Eligibility

Before selecting an overcoat strategy, tank owners must perform a thorough, fit for purpose evaluation. Some owners may rely on visual examination alone to flag delamination, blistering and impact damage. Most, however, will layer in targeted testing aligned with API Recommended Practice 652: Linings of Aboveground Petroleum Storage Tank Bottoms or API Standard 653: Tank Inspection, Repair, Alteration, and Reconstruction, using pass/fail criteria developed with a coatings supplier to ensure the evaluation is both rigorous and relevant to the asset.

Common Inspection and Testing Methods for Existing Linings

Typical investigative tools include the following:

The knife and pull‑off adhesion methods are typically destructive at the test spot and require subsequent touchups. That’s acceptable in the context of a maintenance project in which either an overcoat or a complete reline will follow. The goal is to secure clear evidence. If the adhesion, blistering and hardness values are in the right range, the confidence in an overcoat rises.

Testing also helps align the owner, inspector, applicator and coatings manufacturer before work begins. Clear criteria reduce ambiguity, support better project planning and help prevent a tank from moving into overcoating when the underlying lining condition does not support it.

Inside the Tank Lining Overcoating Process

Once a tank clears the eligibility checks, the maintenance team can craft an overcoat plan. This process is less about designing a brand-new lining system and more about ensuring compatibility and adhesion between the existing film and the new application—without exceeding total film build limits.

Coatings manufacturers can be valuable partners in optimizing the product selection, prep and application parameters for the specific tank and service.

Surface Preparation for Lining Overcoats

Adhesion starts with cleanliness. High pressure water washing removes residual salts and general contaminants. If the tank previously stored hydrocarbons, technicians can use detergents or alkaline cleaners to help break down oily films and organic residues that ordinary washing may not remove. Getting this step right reduces the risk of blistering and adhesion loss later.

After cleaning, mechanical prep typically involves spot and sweep blasting per SSPC SP‑18: Thorough Spot and Sweep Blast Cleaning for Industrial Coating Maintenance. The objective is to roughen the existing film for mechanical adhesion while preserving as much sound lining as possible. Coatings experts can advise on the appropriate blast media and pressures to achieve the desired profile without shredding the coating underneath.

Coating being applied by a man with a sprayer on a storage tank liner

Figure 3. Using ultra‑high‑solids systems, such as Dura‑Plate® UHS or Nova‑Plate® UHS, permits efficient lining overcoating, with the material often able to be installed in a single coat.

Product Selection and Overcoat Application

The overcoat must be compatible with the existing lining system and the tank’s intended service commodities. Common solutions include ultra-high solids epoxy amines, such as Dura-Plate® UHS, and novolac epoxies, such as Nova-Plate® UHS or Nova-Plate® 360. These coatings meet chemical resistance and temperature needs while keeping the overcoated lining within total DFT limits. Ultra-high solids technologies often reach the specified thickness in a single coat, accelerating schedules and reducing labor exposure (Figure 3).

Flexibility is key. The steel shell, the existing lining and the new overcoat each expand and contract at their own rates. Choosing an overcoat with suitable flexibility helps the composite system absorb those movements without cracking or losing adhesion. Where the steel substrate is exposed (from testing or localized repairs), a compatible primer may be used, but broad priming is typically unnecessary in a true overcoat scenario.

Inspection and Quality Control for Overcoated Linings

Quality assurance shouldn’t be a final step. It runs from surface prep through final cure (Figure 4).

It’s helpful to work with AMPP Certified Coating Inspectors throughout a project, as these trained professionals can confirm the surface profile and cleanliness of the prepared areas prior to coatings, document pre- and post-application DFT readings and perform holiday detection using low voltage “wet sponge” methods to identify discontinuities that could allow underfilm corrosion. Areas that fall below target thickness or show holidays will need to be repaired and reinspected before the tank is returned to service.

A disciplined quality assurance/quality control regimen preserves the ROI of the overcoat by ensuring the work can actually deliver the expected life extension.

A storage tank liner after coatings are applied

Figure 4. Prior to putting a tank back in service following a lining overcoat, inspectors will verify the film build and perform holiday testing to confirm continuous protection.

    FAQs About Strategic Tank Lining Overcoats

Contact Sherwin-Williams to Reap the Rewards of a Strategic Overcoat Decision

An overcoat is not a shortcut around the proper assessment of a lining for continued service. It’s also not a cure all for deeply compromised tanks. When the existing lining film is poorly adhered, severely embrittled or already over thickness, the responsible recommendation will be to remove and replace it. Likewise, if the lining’s mechanical integrity is suspect, coating decisions must follow structural remediation, not precede it.

Conversely, when the lining’s adhesion is strong, blistering is minimal and well understood, hardness and flexibility are within tolerances and the total film build following overcoating will remain within spec, an overcoat is possible. Based on those assessments, tank owners and supportive partners can consider this measured, risk-aware way to capture additional service life now, while postponing a major capital project without sacrificing reliability. The cost savings could be significant—but only if all parties have followed discipline in screening the tank for overcoating eligibility and if the overcoat lining is properly applied and inspected.

No owner should have to make this call alone. AMPP Coating Inspectors from coatings manufacturers routinely assist with tank assessments, test selection and criteria development. They can help owners weigh overcoat feasibility against the demands of the product to be stored, the condition of the substrate, and the performance history of the existing film. Equally, they will recommend full removal and replacement when indicators warrant it. That impartial guidance is essential to minimizing risk.

Sherwin-Williams can support tank owners throughout that risk assessment and decision-making process. From lining condition assessments and technical recommendations to product selection and field support, we help owners determine whether overcoating offers a practical path to extended service life or whether a full lining replacement is the better investment.

To evaluate whether a strategic lining overcoat is right for your storage tank, contact us today. Our team can help you review your tank’s condition, understand your options and select a lining maintenance approach that supports long term asset protection.

 

About the Authors

John Zimmerman is a Key Account Manager for Sherwin‑Williams Protective & Marine based in Saint Paul, Minnesota. An AMPP Senior Certified Coating Inspector, Zimmerman brings 20 years of experience in the protective coatings industry, spanning sales leadership, market development and technical support across North America. He supports customers in the downstream energy segment, including petroleum and renewable fuel refining. Contact: John.T.Zimmerman@sherwin.com

Calvin Sumner is a Key Account Manager for Sherwin‑Williams Protective & Marine based in Edmond, Oklahoma. An AMPP Senior Certified Coating Inspector with 20 years of service in the protective coatings industry throughout North America, Sumner supports customers across the midstream energy segment, providing technical guidance and asset‑protection solutions for pipelines and related infrastructure. Contact: Calvin.L.Sumner@sherwin.com

Robert Galvin is a Key Account Manager for Sherwin‑Williams Protective & Marine based in Alberta, Canada. With more than 20 years of experience in the protective coatings industry, Galvin supports Canadian Owners across North America in the oil and gas energy segment. He leverages deep market knowledge and technical coatings expertise to assist asset owners, engineers and applicators throughout the continent. Contact: Robert.H.Galvin@sherwin.com


Energy Coatings & Linings

Explore our protective solutions for the Energy sector. 

Learn More

Energy Resources

Explore our knowledge base on all things coatings and linings for Energy.

Learn More

Energy Newsletter

Subscribe to our Fueling the Future newsletter for essential energy insights.

Subscribe Today
Back To Top