FIRETEX® FX6002 Application Demonstration

Duration - 4:45

• View Transcript

  Sherwin Williams- FX6002 training video_March2022USCARRevision.mp4  [upbeat rock music plays throughout]  [gfx: Sherwin-Williams From spec to protect intro graphic]  [gfx: Firetex logo graphic] [gfx: The Sherwin-Williams Firetex FX6002 Difference-Rapid Drying, Overcoating and Handling Times-Smooth, Aesthetically Pleasing Finish-Suitable For shop or field application-best-class- dry film thickness requirements] (Imagery of technicians preparing, mixing and spraying out coatings) [gfx: equipment-plural comment airless spray equipment] [gfx: preparation - before mixing the product, ensure the application equipment has been cleaned] [gfx: preparation - curing will be compromised if solvent is not purged from the system] [gfx: correct mixing procedure - 1% catalyst (peroxide) is added to the additive(grey) component then mix 1:1 with the base (white) component] [gfx: important note - peroxide must not be added to the base (white) component] [gfx: mixing - mix thoroughly using a mechanical mixer with a stainless steel paddle] [gfx: mixing - using a separate mechanical mixer, thoroughly stir Firetex FX6002 base (white) until uniform] [gfx: adding the product add both parts of the product the correct hoppers] [gfx: preparing for application - remove solvent from line and introduce the product] [gfx: preparing for application - purge remaining solvent from spray line to gun] [gfx: preparing for application - select the spray tip and connect] [gfx: application - hold gun proper distance from substrate and apply uniformly with spray] [gfx: pot life - pot life for Firetex FX6002 is broken down into three different categories:] [gfx: category graphic - 1. Part A (with added peroxide) & Part B both stripped, then added to plural pump hoppers = 48 hours - 2. Part A & Part B both mixed together in the paint line during application = 30 minutes - 3. If during application the sprayers stops for more than 5-10 minutes, the quality of spray pattern will be reduced until fresh materials reaches the spray gun] (Imagery of technicians preparing, mixing and spraying out coatings) [gfx: Firetex FX6002 finish - Firetex FX002 Sprays to an exceptionally fine and smooth finish.] [gfx: The Sherwin-Williams Firetex FX6002 Difference-Rapid Drying, Overcoating and Handling Times-Smooth, Aesthetically Pleasing Finish-Suitable For shop or field application-best-class- dry film thickness requirements] [gfx: Sherwin-Williams Spec to Protect outro animation]