850 Skyscape Effects Part 2

Duration - 5:37

• View Transcript

  <begin subtitles> 00:00:05:23 00:00:07:08 So I'm at the main training school 00:00:07:09 00:00:09:04 in our Warrenville facility. 00:00:10:04 00:00:11:20 We've got the training foils. 00:00:11:21 00:00:13:07 We're going to be doing two new 00:00:13:08 00:00:15:02 effect colors, the 850 effects. 00:00:15:03 00:00:16:07 We're going to be using two spray 00:00:16:08 00:00:17:18 guns as earlier mentioned. 00:00:19:08 00:00:21:01 This is what really what you want to 00:00:21:02 00:00:22:07 be doing all the time. 00:00:22:08 00:00:23:22 I mentioned this on a previous video 00:00:23:23 00:00:25:04 and continued to do this. 00:00:26:11 00:00:28:11 When you're layering a system, the 00:00:28:12 00:00:29:11 this is the 81043 00:00:30:07 00:00:31:07 810 primer. 00:00:32:04 00:00:34:00 It's very important that the 00:00:34:01 00:00:36:07 the product that you lay down 00:00:36:08 00:00:38:11 is you approach 00:00:38:12 00:00:39:22 it as though that's the finished 00:00:39:23 00:00:40:24 product. 00:00:41:00 00:00:41:20 Has to be smooth. 00:00:41:21 00:00:42:24 Consider the wet edge. 00:00:43:00 00:00:44:16 Consider your start point your 00:00:44:17 00:00:46:13 finish point in pot life 00:00:46:14 00:00:47:21 mix correctly. 00:00:47:22 00:00:49:19 So what you'll find is with any 00:00:49:20 00:00:51:19 topcoat, layering the 00:00:51:20 00:00:53:21 topography that you create 00:00:53:22 00:00:56:01 on a primer or a base coat 00:00:56:02 00:00:57:22 will actually the the new 00:00:57:23 00:00:59:22 product will in some 00:00:59:23 00:01:01:22 ways follow that topography. 00:01:01:23 00:01:04:02 So getting the flattest, 00:01:04:03 00:01:06:04 smoothest finish you can 00:01:06:05 00:01:07:20 is always beneficial to any paint 00:01:07:21 00:01:08:16 system. 00:01:08:17 00:01:09:12 So what we're going to do. 00:01:09:13 00:01:11:02 We've got four files here. 00:01:11:03 00:01:12:09 These are training foils. 00:01:12:10 00:01:14:04 Absolutely ideal for 00:01:14:05 00:01:15:14 training and disposing off. 00:01:16:15 00:01:17:20 We're going to wash these down. 00:01:17:21 00:01:18:24 And then we're going to fill up the 00:01:19:00 00:01:19:23 two guns. 00:01:19:24 00:01:21:23 We're going to do a blue and gold. 00:01:21:24 00:01:23:19 And you'll find that the high 00:01:23:20 00:01:25:09 end gun and the 00:01:26:20 00:01:29:11 the budget gun in particular, 00:01:29:12 00:01:31:09 can get the job done with due 00:01:31:10 00:01:33:09 care and attention, mixing, reading 00:01:33:10 00:01:34:11 the datasheet. 00:01:34:12 00:01:36:08 So we're going to be playing 00:01:36:09 00:01:38:04 at the other end of the spectrum. 00:01:38:05 00:01:40:08 What this will show you 00:01:40:09 00:01:42:08 is that the orientation 00:01:42:09 00:01:44:04 of this material is very 00:01:44:05 00:01:46:11 tolerant to application conditions. 00:01:46:12 00:01:49:08 So let's crack on. 00:01:49:09 00:01:50:12 Let's get this done. 00:01:50:13 00:01:52:14 And we'll show you each 00:01:52:15 00:01:54:03 base coat layer. 00:01:54:04 00:01:55:07 So what we're going to be doing now 00:01:55:08 00:01:57:03 is panel wiping the the primer. 00:01:57:04 00:01:58:19 We've done the other three panels. 00:01:58:20 00:02:00:15 We'll showcase how this 00:02:00:16 00:02:02:03 basically works. 00:02:02:04 00:02:03:24 As you noticed I've got gloves on. 00:02:03:25 00:02:05:19 Don't forget the gloves. Of course 00:02:05:20 00:02:07:19 the proper coveralls when we are 00:02:07:20 00:02:09:20 applying the materials, the correct 00:02:09:21 00:02:10:17 PPE. 00:02:10:18 00:02:12:05 Do not forget the PPE. 00:02:12:06 00:02:13:14 Very good practices. 00:02:13:15 00:02:14:22 You can wipe on with a rag. 00:02:14:23 00:02:16:21 Wipe off with a rag. 00:02:16:22 00:02:18:05 These are the spray containers, of 00:02:18:06 00:02:20:13 course. However you want to do that. 00:02:20:14 00:02:22:03 And it's a simple. 00:02:22:04 00:02:25:02 These pre paint wipes 00:02:25:03 00:02:26:09 could be called a spirit wipe. 00:02:26:10 00:02:27:10 Depending on where you are 00:02:28:12 00:02:30:09 they have to be physically 00:02:30:10 00:02:33:00 and manually wiped off. 00:02:33:01 00:02:35:10 Do not on a pre paint wipe 00:02:35:11 00:02:37:12 apply this material 00:02:37:13 00:02:39:14 and allow it to evaporate. 00:02:39:15 00:02:41:18 This requires a manual removal 00:02:41:19 00:02:43:01 process. 00:02:43:02 00:02:44:17 So this is the cleaning 00:02:45:21 00:02:47:19 a very simple procedure. 00:02:47:20 00:02:49:11 But again it's vital. 00:02:49:12 00:02:52:04 Clean clean clean is the key. 00:02:52:05 00:02:54:12 Making sure that each layer 00:02:54:13 00:02:56:18 is the best that the layer can be. 00:02:56:19 00:02:58:09 That saves scuffing time. 00:02:58:10 00:02:59:13 Sanding time. 00:02:59:14 00:03:01:22 Removal of dirt time. 00:03:01:23 00:03:03:09 It depends where you want to put the 00:03:03:10 00:03:05:09 money in the hours, but certainly 00:03:05:10 00:03:07:12 for sure, for sure the first 00:03:07:13 00:03:09:09 time right process is always the 00:03:09:10 00:03:10:09 most economical. 00:03:14:18 00:03:16:01 This was described by using two 00:03:16:02 00:03:17:06 guns, the high end and the budget 00:03:17:07 00:03:18:07 side. 00:03:18:24 00:03:21:05 We've got in this case gold 00:03:21:06 00:03:22:13 and in each container. 00:03:23:16 00:03:25:05 This is not an equipment video. 00:03:25:06 00:03:26:16 It's not showing you how to adjust 00:03:26:17 00:03:28:20 guns. However, there are basic 00:03:28:21 00:03:30:11 requirements that you need to do. 00:03:30:12 00:03:31:22 You got three functions on these 00:03:31:23 00:03:33:16 external mixer guns. 00:03:33:17 00:03:34:19 You've got the ER obviously you've 00:03:34:20 00:03:35:19 got the fluid and then you've got 00:03:35:20 00:03:36:17 the compression which is your 00:03:36:18 00:03:37:17 density. 00:03:37:18 00:03:38:20 So you've got to balance all of 00:03:38:21 00:03:40:18 these off. My advice in most 00:03:40:19 00:03:42:14 if not all occasions, if you 00:03:42:15 00:03:43:17 look at the certainly the high end 00:03:43:18 00:03:45:21 gun, you see a 00:03:45:22 00:03:48:06 test of pressure on the cup. 00:03:48:07 00:03:49:20 This is really optimum. 00:03:49:21 00:03:50:16 You can go above it. 00:03:50:17 00:03:52:14 Of course you can exceed it. 00:03:52:15 00:03:53:14 There is a case where, you know, 00:03:53:15 00:03:55:04 we're atomized these paint materials 00:03:55:05 00:03:56:08 like anything else. 00:03:56:09 00:03:57:09 There's more in the air than 00:03:57:10 00:03:58:21 actually on the job. 00:03:58:22 00:04:00:18 So really, really try 00:04:00:19 00:04:02:10 and stick with the air cap. 00:04:03:18 00:04:05:25 Privilege of the air pressure. 00:04:05:26 00:04:07:20 You can adjust it down slightly to 00:04:07:21 00:04:09:16 suit. But try and stay within 00:04:09:17 00:04:10:25 that perimeter. 00:04:11:00 00:04:13:04 As far as the fluid goes, of course. 00:04:13:05 00:04:14:23 You can adjust the amount of fluid 00:04:14:24 00:04:17:09 into that compressed air space 00:04:17:10 00:04:19:17 to get the nice closed film. 00:04:19:18 00:04:21:12 Now, the definition of a coat of 00:04:21:13 00:04:22:08 paint. 00:04:22:09 00:04:23:24 We at Sherwin-Williams certainly on 00:04:24:00 00:04:26:21 the aerospace side we recommend 00:04:26:22 00:04:28:20 each layer is a closed 00:04:28:21 00:04:30:02 film. 00:04:30:03 00:04:31:10 There are tribal knowledge out 00:04:31:11 00:04:33:02 there. The risk, tribal knowledge. 00:04:33:03 00:04:34:09 Where you put the scattered code 00:04:34:10 00:04:35:12 down and then you build. 00:04:35:13 00:04:36:20 Start building the layers. 00:04:38:10 00:04:41:08 The way we do these materials 00:04:41:09 00:04:43:12 is that each layer is a closed, 00:04:43:13 00:04:46:02 wet, compressed film. 00:04:46:03 00:04:48:05 What that gives you is a good start 00:04:48:06 00:04:50:15 for orientation, color hiding, 00:04:50:16 00:04:52:10 and so on and so forth. 00:04:52:11 00:04:54:08 So what I'm going to be doing, I'll 00:04:54:09 00:04:56:01 adjust these guns, including the 00:04:56:02 00:04:58:10 budget gun, within the limitations 00:04:58:11 00:04:59:11 of the air cap. 00:04:59:12 00:05:01:05 Again, there is information even on 00:05:01:06 00:05:03:08 the budget gun between 00:05:03:09 00:05:05:12 the air going in, the 00:05:05:13 00:05:07:20 fluid coming out of the fluid nozzle 00:05:07:21 00:05:10:07 and the compression within the 00:05:10:08 00:05:11:18 the fan space. 00:05:11:19 00:05:13:03 So we're going to be adjusting these 00:05:13:04 00:05:15:05 up and applying the gold 00:05:15:06 00:05:16:20 and two cross coat 00:05:18:01 00:05:19:13 applications. 00:05:19:14 00:05:21:08 If we need to do a slight dust. 00:05:21:09 00:05:22:22 We'll be showing that too. 00:05:22:23 00:05:25:05 But you'll see how easy with the 00:05:25:06 00:05:26:05 gun. 00:05:27:19 00:05:30:05 Applying good practices 00:05:30:06 00:05:31:16 you can achieve most things. <end subtitles>