Anti-Corrosive Concrete Coatings

Concrete Texture Coating

Concrete Texture Coating is a high build, 100% acrylic latex coating formulated to seal, decorate, and protect new or existing concrete. This alkaline resistant coating can be applied to newly cured concrete that maintains pH levels less than, or equal to 13. Concrete Texture Coating is available in smooth, fine, and medium textures and can be applied, after power washing in a one coat or two coat system.

For use over properly prepared concrete surfaces such as but not limited to:

• Bridge abutments
• Concrete barrier walls
• Concrete girders
• Piers
• Soundwalls

Bridge and Highway Concrete Heavy Stain

Bridge and Highway Concrete Heavy Stain is a 100% acrylic emulsion stain for use on new and existing concrete surfaces. It can be applied in as little as 7 days to concrete surfaces with a pH of 6-13. Bridge and Highway Concrete Heavy Stain penetrates and seals the surface to provide excellent early moisture resistance and outstanding color retention. 

For use over properly prepared concrete surfaces such as but not limited to:

• Bridge abutments
• Concrete barrier walls
• Concrete girders
• Piers
• Soundwalls

DOT Concrete Sealer

DOT Concrete Sealer is an opaque, silicone acrylic sealer, formulated to bond with concrete or masonry surfaces to provide outstanding penetration, chloride intrusion protection, and color retention. The opaque nature of this product hides surface imperfections while providing a waterproofing barrier. 

For use over properly prepared concrete surfaces such as but not limited to:

• Bridge abutments
• Concrete barrier walls
• Concrete girders
• Piers
• Soundwalls

DOT Concrete Sealer 100

DOT Bridge and Highway Concrete Sealer 100 is an opaque, Methyl Methacrylate-Ethyl Acrylate copolymer sealer formulated to bond with concrete or masonry surfaces to provide outstanding penetration, chloride intrusion protection and color retention. The opaque nature of this product hides surface imperfections while providing a waterproofing barrier. DOT Concrete Sealer 100 has a VOC content of less than 100g/L.

For use over properly prepared concrete surfaces such as but not limited to:

• Bridge abutments
• Concrete barrier walls
• Concrete girders
• Piers
• Soundwalls

2K Waterbased Anti-Graffiti Coating

2K Waterbased Anti-Graffiti Coating is a two-component, hydrophobic, polyurethane, permanent coating. It provides excellent graffiti resistance, color, and gloss retention without ambering over time. 2K Waterbased Anti-Graffiti Coating is available in a satin and gloss finish this product is easy to apply and can be applied over multiple coatings. Most graffiti can be removed with a minimum psi pressure wash — saving time and money.  

For use over properly prepared steel and concrete surfaces, such as but not limited to:

• Bridge abutments
• Concrete barrier walls
• Concrete girders
• Piers
• Soundwalls

1K Anti-Graffiti Coating

1K Anti-Graffiti Coating is a single-component, non-sacrificial siloxane coating. It offers excellent cleanability with either power washing or solvent wipe. It is fast drying and offers good UV resistance. 1K Anti-Graffiti Coating does not require a primer and can be applied directly to porous or rough concrete surfaces. 

For use over properly prepared concrete and previously painted surfaces, such as but not limited to:

• Bridge abutments
• Concrete barrier walls
• Concrete girders
• Piers
• Soundwalls