Concrete Texture Coating

Concrete Texture Coating is a high build, 100% acrylic latex coating formulated to seal, decorate, and protect new or existing concrete. This alkaline resistant coating can be applied to newly cured concrete that maintains pH levels less than, or equal to 13. Concrete Texture Coating is available in smooth, fine, and medium textures and can be applied, after power washing in a one coat or two coat system.

For use over properly prepared concrete surfaces such as but not limited to:

• Bridge abutments
• Concrete barrier walls
• Concrete girders
• Piers
• Soundwalls

Bridge and Highway Concrete Heavy Stain

Bridge and Highway Concrete Heavy Stain is a 100% acrylic emulsion stain for use on new and existing concrete surfaces. It can be applied in as little as 7 days to concrete surfaces with a pH of 6-13. Bridge and Highway Concrete Heavy Stain penetrates and seals the surface to provide excellent early moisture resistance and outstanding color retention. 

For use over properly prepared concrete surfaces such as but not limited to:

• Bridge abutments
• Concrete barrier walls
• Concrete girders
• Piers
• Soundwalls

DOT Concrete Sealer

DOT Concrete Sealer is an opaque, silicone acrylic sealer, formulated to bond with concrete or masonry surfaces to provide outstanding penetration, chloride intrusion protection, and color retention. The opaque nature of this product hides surface imperfections while providing a waterproofing barrier. 

For use over properly prepared concrete surfaces such as but not limited to:

• Bridge abutments
• Concrete barrier walls
• Concrete girders
• Piers
• Soundwalls

DOT Concrete Sealer 100

DOT Bridge and Highway Concrete Sealer 100 is an opaque, Methyl Methacrylate-Ethyl Acrylate copolymer sealer formulated to bond with concrete or masonry surfaces to provide outstanding penetration, chloride intrusion protection and color retention. The opaque nature of this product hides surface imperfections while providing a waterproofing barrier. DOT Concrete Sealer 100 has a VOC content of less than 100g/L.

For use over properly prepared concrete surfaces such as but not limited to:

• Bridge abutments
• Concrete barrier walls
• Concrete girders
• Piers
• Soundwalls

2K Waterbased Anti-Graffiti Coating

2K Waterbased Anti-Graffiti Coating is a two-component, hydrophobic, polyurethane, permanent coating. It provides excellent graffiti resistance, color, and gloss retention without ambering over time. 2K Waterbased Anti-Graffiti Coating is available in a satin and gloss finish this product is easy to apply and can be applied over multiple coatings. Most graffiti can be removed with a minimum psi pressure wash — saving time and money.  

For use over properly prepared steel and concrete surfaces, such as but not limited to:

• Bridge abutments
• Concrete barrier walls
• Concrete girders
• Piers
• Soundwalls

1K Anti-Graffiti Coating

1K Anti-Graffiti Coating is a single-component, non-sacrificial siloxane coating. It offers excellent cleanability with either power washing or solvent wipe. It is fast drying and offers good UV resistance. 1K Anti-Graffiti Coating does not require a primer and can be applied directly to porous or rough concrete surfaces. 

For use over properly prepared concrete and previously painted  surfaces, such as but not limited to:

• Bridge abutments
• Concrete barrier walls
• Concrete girders
• Piers
• Soundwalls

Sher-Bar™ TEC

Using advanced technology, Sher-Bar TEC (Textured Epoxy Coating) is the first damage-resistant epoxy coating for rebar, engineered to further extend the service life of steel reinforced concrete structures. With improved bond strength, damage tolerance and corrosion resistance, Sher-Bar TEC reduces the severity of cracks within the concrete, thereby decreasing chloride penetration and the rate of deterioration within the structure. This combination enhances long-term structural performance while reducing the frequency of maintenance repair, downtime, and costs.

• Improved Bond Strength to Concrete: Improved crack mitigation leading to reduction in micro-cracking and chlorides penetration
• Improved Damage Tolerance: Effects of rough handling and installation are demonstrably reduced, maintaining the integrity of the ASTM A775 base layer
• Improved Corrosion Resistance: Protecting the ASTM A775 base layer from damage leaves an intact barrier coating which extends asset life and maximizes total benefit analysis
• Extensive Certification Testing: Meets or exceeds ASTM A1124 specification compliance
• Safety: Reduced workplace slippage
• Sustainability: Made with up to 30% upcycled materials
• Enabling: Allows uses of alternative cementitious materials
• Efficiency: Reduced congestion leading to faster construction

Sher-Bar™ Green

Engineered to extend the service life of steel reinforced concrete structures, Sher-Bar Green fusion-bonded epoxy provides optimum corrosion protection for steel reinforcing bar, dowel bar and related components critical to long-term structural performance. The coating is designed for application on fast production and custom coating lines.

Fused to the steel surface during application, the thermoset polymer structure provides an exceptional barrier to the corrosive effects of chlorides. Sher-Bar Green fusion-bonded epoxy ensures maximum corrosion resistance on steel reinforcing bars and related components.

• Proven Technology: Superior coating mileage, consistently low holidays and minimized cobwebbing
• Corrosion Resistance: Industry-leading formulation of rugged coatings that provide optimum corrosion protection; and proven barrier to de-icing salts, water and chlorides
• Increase Productivity: Maximum flexibility for fabrication; designed for fast production line speeds, optimizing manufacturing rates
• Dependable Supply Chain: Established product available on demand and qualified for use by a strong network of applicators
• Extensive Approvals: Approved for use in all 50 states in the U.S. and numerous regions around the world.
• Sustainability: Zero-VOC emissions, efficient application, and ability to reclaim powder all help meet global compliance requirements

Sher-Bar™ Purple

Prefabricated rebar coatings are a great option to extend the service life of steel reinforced concrete structures. Sher-Bar Purple is designed for prefabricated reinforcing steel and related components, the coating provides corrosion protection that is critical to long-term infrastructure performance. The coating is designed for application on a variety of coating lines for preformed parts and accessories.

Fused to the steel surface during application, the thermoset polymer structure provides an optimum barrier to the corrosive effects of chlorides.

• Optimum corrosion protection
• Exceptional cathodic disbonding resistance
• Designed for application on various production lines
• Meets ASTM A934/A934M

Sher-Bar™ Touch Up 

Sher-Bar Touch Up Coating is a two-component epoxy coating designed for making repairs to rebar coated with Sher-Bar fusion-bonded epoxy. The material is formulated to provide excellent resistance to corrosion.

• ASTM A775 compliant
• ASTM A934 compliant
• ASTM A1124 compliant

Zinc Clad® II Plus

Zinc Clad II Plus is a  three-component, solvent-based, inorganic ethyl silicate, zinc rich coating. This primer provides excellent corrosion resistance while meeting the Class B requirements for Slip Coefficient and Tension Creep resistance for bolted connections. Zinc Clad II Plus also meets SSPC Paint 20 & 29 and AASHTO M-300 specifications. Can be applied as a single coat corrosion coating as an alternative to hot-dipped galvanizing. 

For use over all properly prepared surfaces of structural steel designs and elements such as but not limited to:

• Cable-stays
• Tied arch
• Network arch
• Trusses
• Suspension bridges
• Multi-beam and non-redundant steel girder bridges
• Faying surfaces
• Surfaces in immersion 

Zinc Clad® 4100

Zinc Clad 4100 is  three-component, organic, polyamide epoxy, zinc-rich primer with exceptional application properties and industry leading performance. This coating provides excellent corrosion resistance while meeting the Class B requirements for Slip Coefficient and Tension Creep resistance for bolted connections. Zinc Clad 4100 also meets SSPC Paint 20 & 29 specifications.

For use over all properly prepared surfaces of structural steel designs and elements such as but not limited to:

• Cable-stays
• Tied arch
• Network arch
• Trusses
• Suspension bridges
• Multi-beam and non-redundant steel girder bridges
• Faying surfaces

Macropoxy® 646 Fast Cure

Macropoxy 646 Fast Cure is a two-component, high-solids, fast-drying polyamide epoxy mastic. This high build anti-corrosive intermediate coat provides an excellent barrier protection in multicoat coating systems. Macropoxy 646 Fast Cure conforms to MPI #108 and SSPC Paint 42 specifications. 

For use over all properly prepared surfaces of structural steel designs and elements such as but not limited to:

• Cable-stays
• Tied arch
• Network arch
• Trusses
• Suspension bridges
• Multi-beam and non-redundant steel girder bridges
• Use as a primer on maintenance repairs and overcoating

Acrolon® 218 HS 

Acrolon 218 HS is a polyester modified, aliphatic, acrylic polyurethane. It is a fast drying, urethane that provides improved scratch resistance, color, and gloss retention for exterior exposure. Acrolon 218 HS is an easy to apply, fast-drying finish coat for use in two-coat or three-coat systems. 

For use over all properly prepared surfaces of structural steel designs and elements such as but not limited to:

• Cable-stays
• Tied arch
• Network arch
• Trusses
• Suspension bridges
• Multi-beam and non-redundant steel girder bridges

Hi-Solids Polyurethane 250 

Hi-Solids Polyurethane 250 is a low VOC, two-component, aliphatic, acrylic polyurethane finish. It provides excellent resistance to corrosion and weathering. Hi-Solids Polyurethane 250 is designed for high-performance protection with outstanding exterior gloss and color retention. 

For use over all properly prepared surfaces of structural steel designs and elements such as but not limited to:

• Cable-stays
• Tied arch
• Network arch
• Trusses
• Suspension bridges
• Multi-beam and non-redundant steel girder bridges

Two-Coat Solutions

Sherwin-Williams Two-Coat Solutions demonstrate  unprecedented success — delivering three-coat system performance in just two coats. Our systems are validated through nationalized testing and application to award-winning structures. Sherwin-Williams Two-Coat solutions drive efficiency without sacrificing long-term corrosion protection.

Our top recommended two-coat systems for bridge and highway offer significant reduction to application, cure, and inspection times. 

• Zinc Clad 4100 + Sher-Loxane® 800
• Zinc Clad 4100 + Envirolastic 940 LV
• Zinc Clad II Plus + Sher-Loxane 800

2K Waterbased Anti-Graffiti Coating

2K Waterbased Anti-Graffiti Coating is a two-component, hydrophobic, polyurethane, permanent coating. It provides excellent graffiti resistance, color, and gloss retention without ambering over time. 2K Waterbased Anti-Graffiti Coating is available in a satin and gloss finish this product is easy to apply and can be applied over multiple coatings. Most graffiti can be removed with a minimum psi pressure wash — saving time and money.  

For use over properly prepared steel and concrete surfaces, such as but not limited to:

• Bridge abutments
• Concrete barrier walls
• Concrete girders
• Piers
• Soundwalls

1K Anti-Graffiti Coating

1K Anti-Graffiti Coating is a single-component, non-sacrificial siloxane coating. It offers excellent cleanability with either power washing or solvent wipe. It is fast drying and offers good UV resistance. 1K Anti-Graffiti Coating does not require a primer and can be applied directly to porous or rough concrete surfaces. 

For use over properly prepared concrete and previously painted  surfaces, such as but not limited to:

• Bridge abutments
• Concrete barrier walls
• Concrete girders
• Piers
• Soundwalls